Open topic with navigation

WLAN

802.11be Features

Waveform Setup

• Allows you to view and edit general information about the WLAN 802.11be waveform. See Waveform Setup

Signal Configuration

• Allows you to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a carrier when using the following generation mode:

  • EHT MU PPDU

See Signal Configuration for EHT MU PPDU

• Allows you to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a carrier when using the following generation mode:

  • EHT Trigger Based PPDU

See Signal Configuration for EHT Trigger Based PPDU

• Allows you to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a Non-HT Duplicate Transmission.

See Non-HT Configuration

RU Configuration

• Allows you to configure WLAN 802.11be resource unit parameters when using the following generation modes:

  • RU Configuration for EHT MU PPDU

  • RU Configuration for EHT Trigger Based PPDU

User Configuration

• Allows you to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a user.

See User Configuration for EHT MU PPDU and User Configuration for EHT Trigger Based PPDU

MPDU Configuration

• Allows you to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a data unit when using the following generation modes:

  • MPDU for EHT MU PPDU

  • MPDU for EHT Trigger Based PPDU